Sunlite

Request A Quote

Product Quick Specs

SUNLITE TWINWALL Combines the following attributes:

  • 250 x the impact resistance of glass
  • 99.9% protection from UV radiation
  • Improved insulation properties
  • UV protective layers on both surfaces of the sheet
  • A easy to use system to join and finish

This combination makes Suntuf SUNLITE twinwall polycarbonate the perfect material for both commercial and domestic structures such as pergolas, walkways, facades, skylights and translucent feature walls.

SUNLITE twinwall sheeting combines the strength of polycarbonate with superior insulation due to its cellular structure.

It is the only twinwall sheet available showcasing the SolarSmart technology, which lets in more visible light while reducing heat generating infrared radiation.

SUNLITE comes as standard with double sided UV protection, providing 99.9% protection from harmful UV. Its impact resistance is 250 times that of glass. This combination makes it the perfect material for both commercial and domestic structures such as pergolas, walkways, facades, skylights etc.

Sunlite twinwall colour images

SUNLITE TWINWALL COLOUR RANGE

SUNLITE COLOUR RANGE

Colours Clear Solar IceGreySolar Control Grey BronzeOpal
Light Transmission %80202025 3530
Heat Transmission %804042416447
Shading Co-Efficient0.80.40.420.41 0.640.47
Solar Heat Gain Coefficient (SHGC) 0.80 0.35 0.37 0.36 0.550.54
U Value 2.9 W/m².°K
Warranty10 years against weather breakage – including hail up to 13mm. 10 years against loss of light transmission
CLICK HERE FOR THE FULL WARRANTY TERMS

PROFILE SPECIFICATIONS

Profile Specifications
Sheet Width980 mm
Rafter Centres1000 mm
Purlin Centres1200 mm
Maximum Overhang 50 mm
Minumum Curve Radius 1750 mm
Available Sheet Sizes                        1.0m, 1.5m, 2.0m, 2.5m, 3.0m, 3.5m, 4.0m, 4.5m, 5.0m, 6.0m, 7.0m, 8.0m, 9.0m
Recommended Roof Slope                               5 Degrees

FIXINGS

Sunlite twinwall accessories

You can find additional tips and comments regarding installation HERE.

 

THINGS TO NOTE:

When rafters are at 1000mm centres no purlins are required (except in high wind areas), giving the most aesthetically pleasing and cost effective structure.

Silicones are not recommended for Polycarbonate sheeting.

Sheets can be cut to length free of charge before dispatch; otherwise a fine tooth circular saw can be used.

ASK AN EXPERT

We have one of the most extensive range of polycarbonate products in Australia. Our team of experts are second to none and can advise you on the best solution for your project.

TALK TO AN EXPERT
Back to top
× Ask an expert Get a Quote Give us a call