SUNLITE 7-WALL Combines the following attributes:
|Light Transmission %||64|
|Heat Transmission %|
|Solar Heat Gain Coefficient (SHGC)|
|U Value||2.3 W/m².°K|
|Warranty||10 years against weather breakage – including hail up to 13mm. 10 years against loss of light transmission|
|CLICK HERE FOR THE FULL WARRANTY TERMS|
|Sheet Width||964 mm|
|Rafter Centres||984 mm|
|Purlin Centres||1200 mm|
|Maximum Overhang||50 mm|
|Minumum Curve Radius||1750 mm|
|Available Sheet Sizes||1.0m, 1.5m, 2.0m, 2.5m, 3.0m, 3.5m, 4.0m, 4.5m, 5.0m, 6.0m, 7.0m, 8.0m, 9.0m|
|Recommended Roof Slope||5 Degrees|
You can find additional tips and comments regarding installation HERE.
THINGS TO NOTE:
When rafters are at 984mm centres no purlins are required (except in high wind areas), giving the most aesthetically pleasing and cost effective structure.
Silicones are not recommended for Polycarbonate sheeting.
Sheets can be cut to length free of charge before dispatch; otherwise a fine tooth circular saw can be used.
We have one of the most extensive range of polycarbonate products in Australia. Our team of experts are second to none and can advise you on the best solution for your project.TALK TO AN EXPERT