laserlite -

During temperature changes through the day and night, Laserlite polycarbonate will expand and contract. When fixing the polycarbonate sheeting to a structure it is important that you allow for this ‘movement’ in the sheet. This can be done by pre-drilling a 10 mm (oversized) hole in the sheet for the screws to go through. Vortex screws have a cutter and washer on every screw which means that it takes no extra time to install them, and ensures a watertight seal.
Silicones are not recommended for Polycarbonate sheeting.
As a rule of thumb you will need 7 screws per lineal metre of sheeting.
Always ensure that the inkjet markings on the sheet are facing the sun – this is the side with the protective UV layer on the sheet, which stops the sheet from breaking down prematurely due to the effects of harmful UV.
Sheets can be cut to length free of charge before dispatch, otherwise a fine tooth circular saw can be used.

2000+ colour range

3000 Colour range

Downloadable PDF colour image chart

Laserlite 2000
Colours:	Clear	Opal	Cream	Bronze	Grey
Light Transmission %	93%	49%	43%	38%	19%
Heat Reduction %	0%	52%	62%	33%	47%
Shading Coefficent Ratio	1.00	0.48	0.38	0.67	0.53
Solar Heat Gain Co-Efficient (SHGC)	0.86	0.41	0.33	0.57	0.45
U Value	7.2	7.2	7.2	7.2	7.2
10 years against weather breakage – including hail up to 25mm + 10 years against loss of light transmission
CLICK HERE FOR THE FULL WARRANTY TERMS
CLICK HERE FOR THE FULL PRODUCT DATA SHEET

Laserlite 3000
Colours:	Platinum	Frost	Gun Metal
Light Transmission %	16%	47%	16%
Heat Reduction %	69%	63%	66%
Shading Coefficent Ratio	0.31	0.37	0.34
Solar Heat Gain Co-Efficient (SHGC)	0.27	0.32	0.29
U Value	7.2	7.19	7.2
10 years against weather breakage – including hail up to 25mm + 10 years against loss of light transmission
CLICK HERE FOR THE FULL WARRANTY TERMS
CLICK HERE FOR THE FULL PRODUCT DATA SHEET

PROFILE SPECIFICATIONS