Laserlite® Multiwall is a premium polycarbonate sheet, with the most advanced and proven technology to date. Laserlite® Multiwall polycarbonate sheet is an ideal combination, offering a lightweight glazing panel with excellent impact resistance and has an industry leading 15 year warranty against loss of light transmission.
Manufactured by PT Impack Pratama Industri TBK, a global leader in the design and manufacture of thermoformed polymers, Laserlite® Multiwall polycarbonate sheet offers superior clarity, durability and unmatched design flexibility and structural integrity that surpasses other glazing material.
Laserlite Multiwall polycarbonate features 10 mm thick polycarbonate sheets. Matched with an Aluminium glazing system to provide flexibility with design and ease of installation. The flat sheets give a modern look to the system. The Laserlite Multiwall polycarbonate sheets are available in a range of colours so you can choose one that suites your patio area.
LASERLITE MULTIWALL RANGE SPECIFICATIONS
| Colours | Grey Tint | Platinum | Bronze Tint | Opal | Clear |
|---|---|---|---|---|---|
| Light Transmission (%) | 9 | 11 | 22 | 16 | 86 |
| Heat Transmission (%) | 24 | 16 | 30 | 29 | 76 |
| Shading Co-Efficient | 0.544 | 0.376 | 0.593 | 0.394 | 0.907 |
| Solar Heat Gain Coefficient (SHGC) | 0.47 | 0.33 | 0.52 | 0.34 | 0.79 |
| U Value | 3.17 W/m², °C | ||||
| Warranty | 5 years against weather breakage – including hail up to 25mm and 15 years against loss of light transmission | ||||
| CLICK HERE FOR THE FULL WARRANTY TERMS | |||||
LASERLITE MULTIWALL PROFILE SPECIFICATIONS
| Profile Specifications | |||
|---|---|---|---|
 | |||
| Sheet Width | 1050 mm or 700mm | ||
| Recommended Roof Slope | 5 Degrees | ||
| Rafter Centres | 1070 mm or 720mm | ||
| Purlin Centres | NOT RECOMMENDED – rafter installation only for high wind applications, purlins must be flush with rafters – 1200 mm (max) | ||
| Minumum Curve Radius | 1500 mm | ||
| Maximum Overhang | 50 mm | ||
| Available Sheet Sizes | |||
| 1050mm WIDE SHEETING: 2.0m, 2.5m, 3.0m 3.5m, 4.0m, 4.5m, 5.0m, 5.5m, 6.0m, 6.5m, 7.0m, 7.5m, 8.0m, 8.5m, 9.0m | |||
| 700mm WIDE SHEETING: 2.0m, 2.5m, 3.0m, 3.5m, 4.0m, 4.5m, 5.0m, 7.0m | |||
COLOUR RANGE
FIXINGS
THINGS TO NOTE
Recommended for rafter design ONLY (except in high wind areas), giving the most aesthetically pleasing and cost effective structure. These sheets can be trimmed down to any width to suite existing rafter centers. Laserlite Multiwall sheets should have a minimum fall of 5 degrees – this is important to keep your sheets looking good for many years to come.
Silicons are not recommended for Polycarbonate sheeting – the aluminium glazing system is designed so that silicons are not required to be used on the polycarbonate.
Sheets can be cut to length free of charge before dispatch, otherwise a fine tooth circular saw can be used to trim sheets on site.
Download the full installation guide lines below, or give us a call to discuss the best way to use this system.
We have one of the most extensive range of polycarbonate products in Australia. Our team of experts are second to none and can advise you on the best solution for your project.
TALK TO AN EXPERT
