The Laserlite Polycarbonate range is available in 2 styles, Laserlite 2000+ for performance and reliability and Laserlite 3000 for ultimate comfort. All Laserlite products are designed to ensure ultimate comfort and safety for outdoor living by minimising glare and protecting from 99.9% of harmful UV rays. Laserlite 3000 can reduce the sun’s warming effect by up to 69%, making it perfect for hot Australian conditions. Laserlite offers a limited lifetime Gold or Platinum Warranty. Choose from the range of colours to find a balance of light and heat transmissions to suit your needs.
Laserlite Polycarbonate Range Specifications:
Laserlite 2000 |
|||||
| Colours: | |||||
| Clear | Opal | Cream | Bronze | Grey | |
| Light Transmission % | 93% | 49% | 43% | 38% | 19% |
| Heat Reduction % | 0% | 52% | 62% | 33% | 47% |
| Shading Coefficent Ratio | 1.00 | 0.48 | 0.38 | 0.67 | 0.53 |
| Solar Heat Gain Co-Efficient (SHGC) | 0.86 | 0.41 | 0.33 | 0.57 | 0.45 |
| U Value | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 |
| 10 years against weather breakage – including hail up to 25mm + 10 years against loss of light transmission | |||||
| CLICK HERE FOR THE FULL WARRANTY TERMS | |||||
| CLICK HERE FOR THE FULL PRODUCT DATA SHEET | |||||
Laserlite 3000 |
|||||
| Colours: | |||||
| Platinum | Ice | Gun Metal | |||
| Light Transmission % | 18% | 47% | 16% | ||
| Heat Reduction % | 69% | 63% | 66% | ||
| Shading Coefficent Ratio | 0.31 | 0.37 | 0.34 | ||
| Solar Heat Gain Co-Efficient (SHGC) | 0.27 | 0.32 | 0.29 | ||
| U Value | 7.2 | 7.19 | 7.2 | ||
| 10 years against weather breakage – including hail up to 25mm + 10 years against loss of light transmission | |||||
| CLICK HERE FOR THE FULL WARRANTY TERMS | |||||
| CLICK HERE FOR THE FULL PRODUCT DATA SHEET | |||||
Laserlite Polycarbonate Profile Specifications:
Corrugated |
Greca |
Trimdek |
|
 |
 |
 Not available in Laserlite 3000 |
|
| Sheet Width | 840 mm | 810 mm | 830 mm |
| Sheet Coverage | 755 mm | 760 mm | 762 mm |
| Maximum End Spans | 800 mm | 900 mm | 900 mm |
| Maximum Mid Spans | 1000 mm | 1200 mm | 1200 mm |
| Fixing Spacing on END SPANS | Every Second Crest | Every Second Crest | Every Crest |
| Fixing Spacing on MID SPANS | Every Third Crest | Every Third Crest | Every Crest |
| Minimum Curve Radius | 3500 mm | 3500 mm | 14 000 mm |
| Available Sheet Sizes: | 1.8m, 2.4m, 3.0m, 3.6m, 4.2m, 4.8m, 5.4m, 6.0m, 7.2m, 9.0m | ||
| Recommended Roof Slope: | 5 Degrees | ||
Fixings
Things to note
- During temperature changes through the day and night, laserlite polycarbonate will expand and contract. When fixing the polycarbonate sheeting to a structure it is important that you allow for this ‘movement’ in the sheet. This can be done by pre-drilling a 10 mm (oversized) hole in the sheet for the screws to go through. Laserlite ONE SHOT screws have a cutter on every screw which means that it takes no extra time to install them. One Shot screws also come with a washer that suits polycarbonate ensuring that you have a watertight seal.
- Silicones are not recommended for Polycarbonate sheeting.
- As a rule of thumb you will need 7 screws per lineal metre of sheeting.
- Always ensure that the inkjet markings on the sheet are facing the sun – this is the side with the protective UV layer on the sheet, which stops the sheet from breaking down prematurely due to the effects of harmful UV.
- Sheets can be cut to length free of charge before dispatch, otherwise a fine tooth circular saw can be used.
Click the link below for the full installation guidelines for Laserlite Polycarbonate
